AutoCAD watch a good helper

Graphics are aware of, AutoCAD no special tabulation command or tool, to draw the forms are generally the most primitive way, that is, with lines and text tools to create forms.

If the other software (such as Excel) form produced by replication to AutoCAD, the effect is not good enough.

I recently found a name "statements turn painted the king," the tool software that can magically to Excel 2000/2002 in the form automatically transferred to the AutoCAD drawing graphics, tables, lines, text into AutoCAD entities are free to edit. No need to install the software, directly extract generated CADtools.exe can run the first time after running a computer should be restarted to work properly.

The first step, start Excel 2000/2002, AutoCAD and "statements turn painted the king" software.

The second step, in Excel, the usual method of drawing tables, set up tables for the table line, the line will form a high column width set reasonable, after drawing a good selection of paint to form part of the transfer.

The third step, the system tray Click the "Report transferred painted King" icon to bring up the main interface. In the "System Settings" in general choose the "proportional" mode, in the "Font Settings" in the "fill factor" and "text aspect ratio of" two, "aspect ratio of the text" well understood, AutoCAD text aspect ratio in 0.7 General access is appropriate, "fill factor" is actually a percentage of that text in AutoCAD in the degree of filling to fill the cell.

The fourth step, after doing the above settings, press the "tab" button, and then switch to AutoCAD in, AutoCAD will be prompted to select the tab area, follow the prompts to click the top left corner and then click the lower right corner, and soon automatically in AutoCAD generated form.

Tip: If you switch to painting generated text table cell is too large or too small, it is because the third step in the "fill factor" setting inappropriate reasons, can reset the "fill factor" and then switch to painting, and more test can generate two forms of the beautiful.






Recommended links:



Distributed PowerBuilder works



View the index using sql server 2000 performance



Gateway Bank Of China Has Become The Odds



M2TS to MOV



MAKE SOUNDS (voice)



Easy Compilers And Interpreters



ASE15 trained for several years with great concentration "six pulse Sword"



University Home Page Frequently Black Student Groups As "lambs To The Slaughter"



Across Threads In C # Winform Control Access



Baidu in the mad hope and HARDSHIP



Top Telnet Servers



BAIDU cheating, universally condemned?



ASF To MPEG



MKV to DivX



Compare Audio Players

With SCSI driver for the Win98 Qiao

Author: Li Zhaoyong

Unit bought a 1220 dawn of the computer used to store important data. When bought, according to the requirements of our Win98 and Win2000 installed dual operating system, use the following six months, due to the reason the software had to reinstall the system. First, of course, is to install Win98, but when the installer using the Scandisk command scans the hard disk will appear when the "illegal media error" message, I called the dawn of the server service centers, to note that I have met, they said yes the server had never been installed Win98, Win98 support may be bad or corrupted hard drives, and specific information, please solve the local agents. I think one thing is certain, the machine can certainly install Win98, I used the time it did not have any problem, but the system is not installed my own, I do not know how to install on, or their first think of a way.

Is not the original operating system has problems? Was guided in the Win98 boot disk to enter DOS, use Fdisk to repartition your drive, when assigned to the last partition on the hard drive check how both pass, the final crash. Magic does not use the partition line. Is it because it damaged the hard disk? As the hard disk is to use the SCSI interface, the server system itself with a low-level formatting program, then the hard drive for low grid, low grid through, and no bad sectors show that the hard disk no problem. So then partition, format, but the problem remains. Is Win98's boot disk does not support SCSI drives? So I started using the Win2000 installation disk system partition, format, install Win2000 are passed, the original is the case! I brought the drive to the server to find out plates, including a "Ultra160 Family Mannager Set Versionl.10", which seems to have For Win95/98/NT4.0/DOS driver, then hurried inside to open the documentation above all in English, had the unpleasant task of reading. Really the case, use the DOS boot can not load the SCSI driver, and therefore can not correctly identify the SCSI hard drive. Can directly use the server with the drive? Tried it really worked. Concrete solutions to the following:

1. To prepare a Win98 boot disk, if you need to use the CDROM to install the software on CD-ROM with the necessary drivers.

2. Copies of the server drive floppy disk DOS directory ASPI8U2.SYS and ASPICD.SYS to the Win98 boot disk (this step the key).

3. To re-start the system and making use of step 2 boot disk boot, and then during partition, formatted the system need to start again. All OK.

4. When the Startup menu, select Install from the CD-ROM Win98.

5. When you see "Add New Hardware Wizard" and "PCI SCSI Bus Controller", click "Next."

6. Select "Search for best driver", click "Next", choose to install from a floppy disk, insert the floppy disk in the floppy disk drive SCSI, prompted installed.






Recommended links:



realplayer ps3



Easy Kids EDUCATION



Convert Mov To Avi Online



Competitive Strategy: Legal spying



PC redemption



Dell Go From Here



CNNIC: Domain transfer fee DOES not exist



SAP sales Drop turmoil spread to China, CEO to resign



INTRODUCTION to Fibre Channel based: FCIP and iSCSI comparison



News about Audio Recorders



2006: Five suspense Notebook



Google Video Format



PRINT function



PS3 3gp